Chic in a square - the new "?Karo" sauna plunge pool. With five steps that can be covered with porcelain stoneware, it is a modern addition to any sauna area.
RivieraPool cold plunge pools are equipped with generous entry steps as standard. Treads and bottoms are profiled to prevent slipping, which ensures safe entry and exit. A partial overflow channel drains displaced water into the sewer and serves as a safety overflow. A trough is molded in for the floor drain. The pool walls are stiffened by molded-in profiles.
Square design made of polyester, with 5-step entry,
Steps with anti-slip profile, with surrounding overflow channel,
Handrail made of stainless steel, electropolished, adjustable supporting frame
and two adjustable stair supports, floor drain rg 1 1/2" with polished cover
polished cover and drain trough, two drain spouts d 63 and
Siphon in the channel.
External dimensions: l x w: 195 x 195 cm
clear depth: 120 cm
Filling capacity: 1.600 l
Weight: 110 kg
Basin installation:
For installation, proceed as follows:
- Prepare a flat concrete slab for the sauna plunge pool.
Dimensions: as the upper edge of the pool.
Attention: Provide a recess for the floor drain for Mini 75 and Maxi 110
(width: 25 cm).
- Set up and align the pool, backfill if necessary
- Connect piping
- Fill the basin halfway with water
- Underpin steps and trough with columns (for Rondo 125, insert and adjust
and adjust).
- Set the upper edge of the pool into the floor.
The plunge pools can also be backfilled with lean concrete. In
in this case, the concrete and water must be filled in slowly and evenly so that
pressure equalization takes place.
