Underbench electric sauna heater type ue 35
An underbench sauna heater is an indirect heating system and therefore offers very high safety. Due to the installation of a shaft wall no direct contact possible, which makes the underbench furnace particularly childproof children.
Indirect heating by means of an underbench sauna heater also ensures a gentle sauna climateas the heat is evenly distributed in the sauna room.
Since the underbench heater is placed under the sauna bench, it is particularly space-saving and the benches can be arranged more advantageously in the cabin. Thus the loungers can be either more generous planned, or additional loungers can be installed.
The combination of particularly high Safety and space saving makes this furnace an excellent choice for the barrier-free barrier-free Sauna construction. The risk of injury is minimized and plenty of space is created, so that extra-wide loungers can be installed, for example.
An economical operation of the sauna is ensured due to the low heat radiation is possible. This is achieved thanks to the Double-shell construction achieved. The infusion takes place via a Funnel system.
The low pipe surface load results in a particularly long long service life of the radiators.
The designated product complies with the provisions of Directive 2006/95/eg. The provisions of the directive emv 2004/108/eg is complied with, and confirmed by VDE mark approval certificate no. 40041379. By meeting the EN standards, the device carries the CE mark. All models are technically at the highest level Made in Germany.
Technical data type ue 35:
Download installation and operating instructions type ue 35
Outer casing: |
Stainless steel |
Stone basket: |
Stainless steel across the width of the furnace |
Inner shell: |
Stainless steel |
Furnace connection: |
Stainless steel plenum box, on one side wall (furnace can be flexibly rotated) |
Heating elements: |
1500 watt and 2000 watt heating elements |
|
Outputs: |
ue 35/100: 4.5 | 6.0 | 7.5 | 9.0 kW - 1500w |
|
ue 35/132: 10,5 | 12,0 kW - 1500w + 2000W |
Electrical connection: |
400V 3n ac - 1 circuit (optional: 2 circuits possible) |
Dimensions (WxDxH): |
ue 35/100: 100 x 35 x 60 |
|
ue 35/132: 132 x 35 x 60 |
Safety distance: |
lateral min. 10cm to combustible parts |
Stone filling: |
ue35/100: approx. 20 kg |
|
ue 35/132: approx. 25 kg |
Net kiln weight: |
ue 35/100: approx. 18 kg |
|
ue 35/132: approx. 20 kg |